Shandong Juyuan Bearing Co., Ltd
For over a decade, we have been deeply involved in the field of industrial bearings, focusing on providing highly reliable solutions for radiator fans. In response to complex working conditions such as high temperature, high dust, and long-term operation, the bearings of the Juyuan radiator fan have effectively solved the industry problems of traditional bearings being prone to failure and frequent maintenance through material innovation and structural optimization. They are widely used in commercial vehicle cooling systems, data center cooling equipment, hydraulic cooling of construction machinery, and other scenarios.
Three Core Advantages, Adapting To Harsh Working Conditions
1. Stable operation within a wide temperature range to cope with extreme environments
The bearing can operate continuously within a temperature range of -40 ° C to+150 ° C using a high-temperature resistant engineering plastic cage and fully synthetic grease. After 1000 hours of high-temperature aging test verification, the loss rate of lubricating grease is less than 5%, which is significantly better than the 20% high-temperature failure risk of ordinary bearings. Especially suitable for high-temperature environments such as engine compartments, ensuring that the fan runs at high speeds without clogging or deformation, and maintaining stable equipment heat dissipation efficiency.
2. Low vibration and silent design to enhance user experience
By using precision grinding technology to control the roundness error of the raceway to ≤ 5 μ m and optimizing the dynamic balance of the impeller, the operating noise of the bearing can be controlled below 45dB (1 meter distance), which is 15% lower than similar products. The actual test data of new energy vehicles shows that the fan system equipped with multi-element bearings reduces the high-speed noise level in the cabin by 8dB, effectively improving the comfort of the cabin and meeting the noise reduction performance requirements of high-end equipment.
3. Long service life, maintenance free, and reduced usage costs
Optimized ball contact angle design (standard 15 °, supporting 25 ° high load customization), combined with galvanized anti-corrosion treatment (salt spray test ≥ 500 hours), the rated life (L10) of the bearing can reach 50000 hours, which is three times that of ordinary oil containing bearings. Built in dual lip sealing structure (IP54 protection level) effectively blocks dust and water vapor from entering, reducing maintenance frequency by 80%, especially suitable for difficult to maintain scenarios such as field work machinery and industrial boilers.
Three Reasons To Choose Juyuan
Full scenario adaptation plan
We provide various technical solutions, such as oil containing bearings, ball bearings, magnetic levitation bearings, etc., supporting special configurations such as IP67 waterproof and PTFE high-temperature resistant coating. We can customize flange installation structures, double row bearing layouts, and other non-standard specifications based on different working conditions such as commercial vehicles, construction machinery, and industrial equipment.
Strict testing ensures reliability
Radiator Fan Bearings Product Parameters Table
|
Parameter Category |
Technical Specifications |
|
1. Material & Construction |
|
|
Rolling Element Material |
Chrome steel (AISI 52100), hardness: ≥62 HRC |
|
Cage Material |
High-temperature engineering plastic (PA66+GF30), operating temperature: -40°C to +150°C |
|
Seal Material |
NBR rubber with steel reinforcement, IP54 protection against dust/water splashing |
|
2. Performance Parameters |
|
|
Operating Temperature Range |
-40°C to +150°C (continuous operation) |
|
Noise Level (1m Distance) |
≤45 dB (at rated speed), 15% lower than standard bearings |
|
Rated Life (L10) |
50,000 hours (3x longer than conventional oil-impregnated bearings) |
|
Maximum Rotational Speed |
12,000 RPM (with balanced impeller assembly) |
|
Friction Coefficient |
0.0018 (reduced by 20% vs. traditional designs) |
|
Radial Runout Tolerance |
≤5μm (grinding accuracy: IT5 class) |
|
3. Environmental Resistance |
|
|
Salt Spray Test Duration |
≥500 hours (ASTM B117, no visible corrosion) |
|
Lubricant Retention Rate (150°C) |
≤5% weight loss after 1,000-hour aging test (GB/T 12748) |
|
Dust/Water Ingress Protection |
Double-lip contact seal, prevents ≥99.5% of 50μm particles from entering (IP54 certified) |
|
4. Design Features |
|
|
Contact Angle Design |
15° standard (25° optional for heavy radial loads) |
|
Balance Grade |
G6.3 (ISO 1940), ensuring smooth operation at high speeds |
|
Mounting Compatibility |
Flange-mount, press-fit, and snap-ring designs available for universal applications |
|
5. Quality & Compliance |
|
|
Certification |
IATF 16949, ISO 9001, CNAS-approved laboratory testing capabilities |
|
Testing Standards |
Fatigue testing (ISO 16232), thermal cycling (IEC 60068), vibration analysis (ISO 1940) |
|
6. Delivery & Service |
|
|
Lead Time (Standard Products) |
≤72 hours for stock items |
|
Customization Lead Time |
≤4 weeks for non-standard designs (flange geometry, sealing options, etc.) |
|
Global Support Network |
15 regional service centers in North America, Europe, and Southeast Asia |
Notes:
All parameters are verified through in-house CNAS-certified testing facilities.
Custom configurations (e.g., IP67 waterproofing, PTFE anti-friction coating) are available upon request.
Performance data is based on typical operating conditions (23°C ambient temperature, 50% load rating).
This table provides a clear, standardized overview of technical specifications for international markets, suitable for inclusion in product datasheets, RFQs, and global marketing materials.
Hot Tags: heat buster fan bearings, China heat buster fan bearings manufacturers, factory, Printing Press Bearings, Tractor Spindle Bearing, Zinc Alloy Bearing, 12v Dc Motor Bearings, Declutch Bearing, British Non standard Bearings

