Spherical Roller Bearing Smooth Surface

May 05, 2025

Leave a message

For the installation axial clearance of spherical roller bearings, it can be adjusted by adjusting nuts on the journal, adjusting washers and threads in the bearing housing holes, or by pre-tightening springs. The size of the axial clearance is related to the arrangement of the bearings during installation, the distance between the bearings, the material of the shaft and the bearing seat, and can be determined according to the working conditions. For spherical roller bearings with high load and high speed, when adjusting the clearance, the influence of temperature rise on the axial clearance must be considered, and the clearance reduction caused by temperature rise must be estimated, that is to say, the axial clearance The gap should be adjusted appropriately larger. For low-speed and vibration-bearing bearings, clearance-free installation or preload installation should be applied. Its purpose is to make the rollers and raceways of spherical roller bearings have good contact, distribute the load evenly, and prevent the rollers and raceways from being damaged by vibration and impact. After adjustment, check the size of the axial clearance with a dial gauge. The method is to fix the dial indicator on the fuselage or the bearing seat first, make the contact of the dial indicator withstand the smooth surface of the shaft, and push the shaft left and right along the axial direction. The maximum swing of the pointer is the axial clearance value.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!