Deep groove ball bearings, the bearing load is too small during operation, which will cause the ball and the raceway to slide, which becomes the cause of abrasion. In particular, large deep groove ball bearings with large ball and cage weights have this tendency.
In many cases, bearings will corrode, and there are many reasons for bearing corrosion, and the most common factors in our daily life are the following:
1) Due to the poor sealing device, it is invaded by moisture and dirt;
2) The bearing is not used for a long time, exceeds the anti-rust period, and lacks maintenance.
3) The surface roughness of the metal is large;
4) Contact with corrosive chemical media, the bearing is not clean, there is dirt on the surface, or contact the bearing with sweaty hands, after the bearing is cleaned, it is not packaged or installed in time, and it is exposed to the air for a long time, and is invaded and contaminated by air moisture;
5) Ambient temperature and humidity and contact with various environmental media; The rust inhibitor has failed or the quality is not up to standard.
