Injection Molding Machine Bearings

Injection Molding Machine Bearings

Details
The bearings on injection molding machines mainly do two important things: ensuring the accuracy of plastic processing under high pressure (the size of the product is accurate), and ensuring the durability of the machine itself (not easily damaged).
Category
Industrial Bearing
 
Send Inquiry
Description
Technical Parameters

The bearings on injection molding machines mainly do two important things: ensuring the accuracy of plastic processing under high pressure (the size of the product is accurate), and ensuring the durability of the machine itself (not easily damaged). Among them, deep groove ball bearings are particularly commonly used because they have three major benefits: low rotational resistance (labor-saving, energy-saving), ability to withstand force in both directions (more stable), and less need for frequent maintenance (saving time and money)

 

Spherical roller thrust bearings handle extreme axial loads with self-aligning capabilities. Proper component matching-ball screws for drive systems, thrust bearings for extrusion shafts-optimizes performance under harsh conditions.

 

Core Design Philosophy for Plastics Machinery

Plastics processing involves cyclic high loads (clamping forces up to 5,000 tons), rapid acceleration/deceleration (platen movement speeds >1m/s), and exposure to cooling water, plastic additives, and lubricant degradation. Our bearings address these challenges through a system-level design approach:

 

Material & Heat Treatment

  1. Rings: Premium AISI 52100 steel (equivalent to ISO 683-17 100Cr6), with carbon content optimized to 1.0-1.1% for superior wear resistance.
  2. Heat treatment: Vacuum induction hardening (840-860°C) followed by deep cryogenic processing (-196°C), achieving a martensitic structure with 62-64 HRC hardness and residual compressive stress ≥500MPa. This extends L₁₀ fatigue life by 35% compared to conventional through-hardened bearings.

 

Geometry Optimization

  1. Ball bearings: Angular contact designs (15°/25° contact angles) with Gothic arch raceways, minimizing stress concentration under combined radial/axial loads.
  2. Roller bearings: Cylindrical roller configurations (NU/NJ series) with crowned rollers (0.02-0.05mm profile offset), reducing edge stress in misaligned platen guide systems.
  3. Radial clearance: Customized to C2/C3 classes (ISO 5753) based on machine tonnage, balancing rigidity and thermal expansion tolerance.

 

Contamination Control

  1. Sealing: Dual-lip nitrile (NBR) or fluoroelastomer (FKM) seals with 0.03-0.05mm radial interference, paired with labyrinth shields. This combination limits grease leakage to <0.5g/1,000 hours and prevents water ingress (IP65 protection per IEC 60529).
  2. Surface finish: Raceways ground to Ra 0.02-0.04μm (ISO 4287), reducing friction and particle entrainment in lubricant films.

 

Application-Specific Performance Validation

Our bearings undergo rigorous testing to simulate real-world plastics processing conditions:

  • Fatigue testing: Conducted on 4,000kN hydraulic test rigs (2Hz cyclic loading, 80°C ambient), achieving L₁₀ life >15,000 hours for clamping unit bearings.
  • Thermal stability: Tested at 120°C continuous operation (150°C peak) with PAO-based synthetic grease (ISO VG 100), maintaining lubricant consistency for 8,000 hours.
  • Field validation: Deployed in 200+ injection molding machines (500-4,000 ton capacity) from leading OEMs (e.g., Engel, Haitian, Sumitomo), with customer feedback indicating 25% reduction in maintenance downtime compared to previous suppliers.

 

Customization for Diverse Plastics Applications

Recognizing the variability in plastics processing (from micro-molding to large-scale automotive parts), we offer tailored solutions:

  • High-speed variants: Ceramic hybrid bearings (Si₃N₄ balls) for screw drives, reducing centrifugal force by 40% at 3,000rpm.
  • Corrosion-resistant options: 440C stainless steel rings with PTFE seals, suitable for PET bottle preform molding with glycol-based cooling systems.
  • Modular designs: Split outer rings for easy installation on non-separable platen guides, reducing machine downtime by 60% during replacement.

 

Global Support for Uninterrupted Production

Backed by ISO 9001:2015 and IATF 16949 certifications, our supply chain ensures:

  • 7-day lead time for standard sizes (60-300mm bore) from 10,000+ unit inventory.
  • On-site technical support within 48 hours for EU/NA customers via regional service centers.
  • 2-year warranty covering material and workmanship defects, with condition monitoring reports available for critical applications.

 

Technical Parameters

Bearing Type

Load Capacity

Friction Level

Self-aligning Feature

Deep Groove Ball Bearings

Radial and bidirectional axial loads

Low

No

Spherical Roller Thrust Bearings

Extremely high axial and substantial radial loads (highest rated load among thrust bearings)

Moderate

Yes

Ball Screw Bearings

High - load driving under harsh conditions

Moderate

No

Thrust Ball Bearings

Thrust and radial loads, can resist impact loads

Moderate

Can accommodate a certain degree of misalignment

Hot Tags: injection molding machine bearings, China injection molding machine bearings manufacturers, factory, Heat Buster Fan Bearings, Pellet Crusher Bearing, Heavy Duty Swivel Bearing, Internal Combustion Engine Bearings, Machine Tool Bearings, Large Diameter Turntable Bearings

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!