The basic structure of the bearing is composed of four parts: the inner ring, the outer ring, the rolling element (steel ball or roller) and the cage.
1. Inner ring (also known as inner sleeve or inner ring): usually fixed on the journal, the inner ring rotates with the shaft. There are grooves on the outer surface of the inner ring for the steel ball or roller to roll, which is called the inner groove or inner raceway.
2. Outer ring (also known as jacket or outer ring): usually fixed on the bearing seat or the housing of the machine, and plays the role of supporting the rolling elements. There are also grooves on the inner surface of the outer ring for the steel balls or rollers to roll, which are called inner grooves or inner raceways.
3. Rolling elements (steel balls or rollers): Each set of bearings is equipped with one or several sets of rolling elements, which are installed between the inner ring and the outer ring to play the role of rolling each transmission force. Rolling elements are load-bearing parts, and their shape, size and number determine the load-bearing capacity and the performance of each high-speed operation.
4. Cage (also known as retainer or isolator): evenly separate the rolling elements in the bearing from each other, so that each rolling element rolls normally between the inner ring and the outer ring.
